DPS-100 is an adjustable differential pressure switch for HVAC filter, fan and airflow-status monitoring. It provides an SPDT switching contact when the pressure reaches the selected switching point. Choose the range to suit the application.
Six adjustable pressure-range options, from 20-200 Pa to 500-2500 Pa.
SPDT contact for switching and status monitoring.
Adjustable switching point with a pressure scale in Pa.
For air, non-flammable and non-aggressive gases.
IP54 protection rating.
| Option | Measuring / adjustable range |
|---|---|
| 1 | 20-200 Pa |
| 2 | 30-300 Pa |
| 3 | 40-400 Pa |
| 4 | 50-500 Pa |
| 5 | 200-1000 Pa |
| 6 | 500-2500 Pa |
These are separate range options. Select the required version when ordering; one unit is not specified to cover all six ranges.
| Parameter | DPS-100 |
|---|---|
| Product type | Differential pressure switch |
| Contact type | SPDT |
| Contact rating | 1.5 A (0.4 A) / 250 VAC |
| Maximum operating pressure | 2500 Pa |
| Medium / ambient temperature | -20 to +85 °C |
| Pressure media | Air, non-flammable and non-aggressive gases |
| Protection rating | IP54 |
The DPS-100 air pressure switch can be used to monitor the pressure condition associated with ventilation filters, fans and airflow. A connected control system can use the switching contact for status indication or a pressure-threshold alarm, according to the system design.
Start with the switching pressure required by your filter, fan or ventilation design. Select a range that contains that setpoint and provides appropriate adjustment for the application. For example, a 20-200 Pa version and a 500-2500 Pa version serve different setpoint requirements.
No. 2500 Pa is the listed maximum operating pressure. The adjustable switching range depends on which of the six range options you select.
The specified output is an SPDT switching contact. Choose a differential pressure transmitter if your controller needs a continuous analogue or digital pressure measurement.
The specified media are air, non-flammable and non-aggressive gases. Do not select it for liquids or corrosive media on the basis of this specification.
Check the selected pressure range, the contact load, the pressure medium and the environmental conditions. Confirm mounting orientation, pressure-port connections and the correct terminal arrangement using the instructions for the supplied version.
Minimum order quantity: 5 pcs. Email info@heatcoolsmart.com with your required switching range, application and quantity.
Need a continuous pressure measurement? See the DPT-100 and DPT-600 differential pressure transmitters.





