STE-600 room temperature sensor and transmitter with LCD for HVAC, featuring IP30 protection and analogue, passive temperature sensor or Modbus RTU options. The LCD-equipped room model combines local display with a temperature input for a compatible building automation controller. Select the required output version and configured measuring range before ordering.
Room temperature sensor and transmitter with LCD.
Catalogue temperature range: −40 to +140 °C (−40 to +284 °F).
Active-output accuracy: ±0.3 °C at 20 °C.
0–10 V, 0–5 V, 4–20 mA, passive temperature sensor and Modbus RTU options.
IP30 protection rating.
| Parameter | STE-600 |
|---|---|
| Product type | Room Temperature Sensor & Transmitter with LCD |
| Temperature measuring range | −40 to +140 °C (−40 to +284 °F) |
| Accuracy | ±0.3 °C for active output, at 20 °C |
| Output options | 0–10 V / 0–5 V / 4–20 mA / passive temperature sensor |
| Digital interface option | Modbus RTU |
| Protection rating | IP30 |
| Display | LCD |
The outputs are selection options for different versions. Confirm the output, configured range and display availability for the ordered configuration rather than assuming every unit includes all signals.
The STE-600 room temperature sensor with LCD is intended for HVAC and building automation applications where a room-temperature measurement and a local display are required. It can provide an input to a compatible BMS, DDC or PLC. Select a suitable indoor installation environment for its IP30 protection rating.
| Required controller input | Selection consideration |
|---|---|
| 0–10 V or 0–5 V | Match the voltage signal and temperature scaling to the controller input. |
| 4–20 mA | Confirm current-input compatibility and the supply and loop requirements of the supplied version. |
| Passive sensor | Specify the exact sensing element and resistance characteristic required by the controller. Confirm LCD availability for that configuration. |
| Modbus RTU | Confirm protocol compatibility and obtain communication settings and register information for the supplied version. |
STE-600 is listed with an LCD, while STE-500 is the room temperature model without a catalogue-listed display. Choose according to the need for local display and confirm the output version for each model.
The catalogue describes a temperature sensor and transmitter with LCD. It does not specify setpoint adjustment, a switching relay or stand-alone room control. Control functions depend on the connected controller unless separately confirmed.
The catalogue lists the display and output options without explaining every configuration combination. Specify both the required output and LCD requirement, especially for a passive sensor version, and confirm the supplied configuration.
The protection rating is IP30, not a waterproof rating. Use an installation environment suitable for that protection and confirm the operating conditions for the supplied version.
±0.3 °C is specified for active output at 20 °C. It should not be assumed to describe every passive sensing element, every operating temperature or the LCD resolution. Display resolution is not stated in this catalogue entry.
Confirm the signal type and scaling for analogue inputs, the element type for passive inputs, or the communication configuration for Modbus RTU. Also confirm the power and connection requirements for the supplied version.
MOQ: 5 pcs. Email info@heatcoolsmart.com with your application, operating temperature, output requirement, LCD requirement, controller input and quantity.
For the room model without a catalogue-listed LCD, see STE-500 room temperature sensor and transmitter.





