STE-500 Room Temperature Sensor & Transmitter for HVAC | iCoolheat

STE-500 Room Temperature Sensor & Transmitter for HVAC | iCoolheat 1
  • STE-500 Room Temperature Sensor & Transmitter for HVAC | iCoolheat 1
  • Place of Origin:China
  • Brand Name:iCoolheat
  • MOQ:5 pcs
  • Packaging Details:Standard Export Carton
  • Payment Terms:T/T
  • Supply Ability:20,000 pcs/month
  • Lead Time:7 days for standard models

STE-500 wall-mount room temperature sensor and transmitter for HVAC, with IP30 protection and analogue, passive temperature sensor or Modbus RTU options. It provides a room-temperature measurement input for building automation systems. Choose the output version and configured measuring range to match the controller.

Key features

  • Room temperature sensor and transmitter with wall mounting.

  • Catalogue measuring range: −40 to +140 °C (−40 to +284 °F).

  • Active-output accuracy: ±0.3 °C at 20 °C.

  • 0–10 V, 0–5 V, 4–20 mA, passive temperature sensor or Modbus RTU options.

  • IP30 protection rating.

Technical specifications

ParameterSTE-500
Product typeRoom Temperature Sensor & Transmitter
Temperature measuring range−40 to +140 °C (−40 to +284 °F)
Accuracy±0.3 °C for active output, at 20 °C
Output options0–10 V / 0–5 V / 4–20 mA / passive temperature sensor
Digital interface optionModbus RTU
Protection ratingIP30
MountingWall mount

The listed signals are alternatives for different versions. Confirm the required output and configured measuring range when ordering; not every unit provides all signals simultaneously.

Applications

The STE-500 room temperature sensor can be used as a temperature input for HVAC monitoring and building automation in rooms such as offices, hotel rooms and other occupied indoor spaces, where the operating environment suits the selected version. It supplies measurement information to a compatible controller; control actions depend on the connected system.

Output selection

OptionSelection guidance
0–10 V or 0–5 VMatch the controller’s voltage input range and set the corresponding temperature scaling.
4–20 mACheck the controller’s current-input capability and confirm the supply and loop requirements of the supplied version.
Passive temperature sensorConfirm the sensing element and resistance characteristic required by the controller.
Modbus RTUConfirm protocol compatibility and obtain communication settings and register information for the supplied version.

Selection questions

Is STE-500 a room thermostat?

The catalogue identifies it as a room temperature sensor and transmitter. Do not assume it includes a setpoint control, relay output or stand-alone heating and cooling control. Select the external controller to suit the application.

Where should the wall-mounted sensor be installed?

Choose a position representative of the room temperature being monitored. Consider sunlight, nearby heat sources and supply-air drafts that may make the reading unrepresentative. Follow the supplied installation instructions for the actual version.

Can it be used in wet or outdoor locations?

The listed protection rating is IP30, not a waterproof rating. Select an environment appropriate for that rating and confirm operating conditions for the supplied model before using it in damp or exposed locations.

How is STE-500 different from STE-600?

The catalogue describes STE-600 as a room temperature sensor and transmitter with an LCD. STE-500 is the wall-mount room model without a catalogue-listed display. Choose according to the installation and need for a local display, and confirm each version’s output.

Does ±0.3 °C apply over the complete measuring range?

The catalogue specifies ±0.3 °C for active output at 20 °C. Do not apply that value to all temperatures or to every passive sensing element. Provide your operating temperature and accuracy requirement for selection.

How do I connect it to a BMS, DDC or PLC?

Choose a signal supported by the controller: 0–10 V, 0–5 V, 4–20 mA, the specified passive sensing element or Modbus RTU. Match the electrical input and scaling, or the digital communication configuration, to the supplied version.

Request a quotation

MOQ: 5 pcs. Email info@heatcoolsmart.com with your room application, operating temperature, required output, controller input specification and quantity.

For other installation formats, see STE-100 duct / immersion and STE-300 remote probe.

Request Free Quote

Other Products You May Like

QUALITY · RELIABILITY · INNOVATION
Get In Touch With Us
Follow Us
Top