STE-400 cable temperature sensor for HVAC applications, with a −35 to +105 °C range, IP65 protection, 2-, 3- or 4-wire options and 0.5–6 m cable lengths. Select the wiring configuration and supplied cable length to suit the measurement location and controller. Confirm the sensing element required by your controller when ordering.
| Parameter | STE-400 |
|---|---|
| Product type | Cable Temperature Sensor |
| Temperature measuring range | −35 to +105 °C (−31 to +221 °F) |
| Protection rating | IP65 |
| Insulation resistance | Typically >100 MΩ |
| Wiring options | 2-wire / 3-wire / 4-wire |
| Cable length | 0.5–6 m |
Wiring configurations and cable lengths are selection options. Confirm the supplied version before ordering.
The STE-400 cable temperature sensor can be considered for HVAC temperature monitoring where the probe needs to be positioned away from the controller. Match the selected sensor to the controller input, the operating temperature and the installation environment. Confirm medium compatibility and probe suitability for the actual measurement location.
Provide the exact sensor input specification required by the BMS, DDC, PLC or temperature controller. Wire count alone does not identify the sensing element or its resistance characteristic. Specify a supplied cable length within the catalogue’s 0.5–6 m range and confirm the terminal arrangement for the selected version.
Match the configuration to the controller’s sensor input and the supplied sensing element. In resistance measurement systems, wire arrangement can affect how lead resistance is handled, but a particular controller and sensor must support that arrangement. Do not choose by wire count alone.
The catalogue identifies it as a cable temperature sensor and does not list those transmitter outputs for this model. Confirm the required sensing element and controller input before purchase; do not assume it has the outputs of the STE-100, STE-200 or STE-300.
The STE-400 catalogue entry does not specify accuracy. Provide the operating temperature and required tolerance so the appropriate sensor version can be confirmed. The accuracy stated for other STE models must not be applied to this model.
The catalogue lists cable lengths from 0.5 to 6 m. Confirm any extension or non-standard length before ordering, including its effect on the selected sensing element, controller compatibility and measurement performance.
No continuous-immersion rating is stated. Confirm the medium and installation conditions for the selected probe rather than assuming IP65 permits permanent submersion.
The catalogue gives a typical insulation resistance of greater than 100 MΩ. This is separate from the sensing element’s measurement resistance and does not identify its type or temperature accuracy.
MOQ: 5 pcs. Email info@heatcoolsmart.com with your application, operating range, required sensing element or controller input specification, wiring configuration, cable length and quantity.
For a remote-probe sensor and transmitter with catalogue-listed signal options, see STE-300.





