THE-400 miniature humidity and temperature probe for HVAC monitoring, with 0–100 %RH measurement, conformal coating and analogue or passive temperature options. The compact probe format allows the sensing point to be placed where a separate probe is required. Specify the output, operating conditions and electrical requirements before ordering.
Miniature humidity and temperature probe.
Humidity range: 0–100 %RH.
Catalogue temperature range: −40 to +140 °C (−40 to +284 °F).
Conformal coating for sensing-element protection.
0–10 V, 0–5 V, 4–20 mA or passive temperature options.
Catalogue supply: 4.5–15 V DC; confirm requirements for the selected output version.
| Parameter | THE-400 |
|---|---|
| Product type | Miniature Humidity & Temperature Probe |
| Humidity measuring range | 0–100 %RH |
| Temperature measuring range | −40 to +140 °C (−40 to +284 °F) |
| Sensing-element protection | Conformal coating |
| Output options | 0–10 V / 0–5 V / 4–20 mA / passive temperature sensor |
| Power supply listed in catalogue | 4.5–15 V DC; confirm applicability to the selected output version |
| Protection rating | Housing IP65 / Probe IP30 |
Output signals are version options, not simultaneous outputs from every probe. Passive sensing refers to temperature. Confirm the configured range, output combination and compatible supply before purchase.
The THE-400 miniature humidity probe can be considered for HVAC air monitoring and building automation installations requiring a compact humidity and temperature sensing format. Check the available mounting space, air exposure and controller input requirements. The housing and sensing probe have different protection ratings.
Match a 0–10 V or 0–5 V version to the controller’s voltage input, or a 4–20 mA version to a compatible current input. For passive temperature sensing, confirm the exact sensing element and resistance characteristic required by the controller.
The catalogue lists a 4.5–15 V DC supply alongside several output options without defining the valid supply for each version. Confirm the minimum supply and load conditions for the selected output before connection; do not assume every listed signal operates across the entire supply range.
The THE-400 catalogue entry lists analogue and passive temperature options but does not list a digital interface. Do not assume Modbus RTU support from other THE models. Specify any digital requirement for confirmation before purchase.
The catalogue does not specify the valid supply-and-output combinations. Obtain confirmation of the minimum supply voltage and output conditions for the selected version rather than treating the general supply entry as approval for that combination.
The passive option is identified for temperature. Confirm the required humidity signal and passive temperature element as part of the ordered output combination.
The catalogue lists housing IP65 and probe IP30. The 0–100 %RH range and conformal coating do not establish suitability for water spray, condensation or immersion at the sensing probe.
The THE-400 catalogue entry does not state accuracy or cable length. Provide the required tolerances, operating conditions and cable requirements so the supplied configuration can be confirmed. Specifications from larger THE models should not be copied to this probe.
Check the probe arrangement, available space, medium and environmental suitability, output type, controller input, supply voltage and load conditions. Confirm the actual connection instructions for the supplied version.
MOQ: 5 pcs. Email info@heatcoolsmart.com with the measurement location, humidity and temperature conditions, output, available supply voltage, cable requirement and quantity.
For a separate housing with a catalogue-listed 1–2 m remote probe cable, see THE-300.





