STE-200 Wall Mount Temperature Sensor & Transmitter | iCoolheat

STE-200 Wall Mount Temperature Sensor & Transmitter | iCoolheat 1
  • STE-200 Wall Mount Temperature Sensor & Transmitter | iCoolheat 1
  • Place of Origin:China
  • Brand Name:iCoolheat
  • MOQ:5 pcs
  • Packaging Details:Standard Export Carton
  • Payment Terms:T/T
  • Supply Ability:20,000 pcs/month
  • Lead Time:7 days for standard models

STE-200 wall-mount temperature sensor and transmitter for HVAC, with −40 to +140 °C measurement, IP65 protection and output options to suit your controller. Select an analogue output, passive temperature sensor or Modbus RTU version to match the building automation system. The STE-200 is designed for wall mounting.

Key features

  • Wall-mount temperature measurement for HVAC and building automation.
  • Catalogue measuring range: −40 to +140 °C (−40 to +284 °F).
  • Active-output accuracy of ±0.3 °C at 20 °C.
  • 0–10 V, 0–5 V, 4–20 mA, passive sensor and Modbus RTU options.
  • IP65 protection for both housing and probe.

Technical specifications

ParameterSTE-200
Product typeWall Mount Temperature Sensor & Transmitter
Temperature measuring range−40 to +140 °C (−40 to +284 °F)
Accuracy±0.3 °C for active output, at 20 °C
Output options0–10 V / 0–5 V / 4–20 mA / passive temperature sensor
Digital interface optionModbus RTU
Protection ratingHousing IP65 / Probe IP65
MountingWall mount

The signals listed are options for different versions. Specify the required output when ordering; do not assume every STE-200 provides all outputs simultaneously. Confirm the configured range for the supplied version.

Applications

The STE-200 wall-mount temperature sensor provides a temperature input for HVAC monitoring and building automation applications requiring this mounting format. Choose the mounting position according to the temperature you need to measure. The ordered signal must match the input requirements of the BMS, DDC or PLC.

Output selection

OptionWhat to check
0–10 V / 0–5 VMatch the sensor’s voltage output to the controller’s analogue input range and temperature scaling.
4–20 mACheck that the controller accepts a current signal and confirm the supply and loop requirements of the selected version.
Passive temperature sensorConfirm the exact sensing element and resistance characteristic supported by the controller before ordering.
Modbus RTUConfirm the controller’s Modbus RTU support and obtain the communication settings and register information for the supplied version.

Selection questions

How is STE-200 different from STE-100?

The STE-200 is listed for wall mounting, while the STE-100 is listed for duct or immersion installation. Select by the measurement location and installation method. Do not select an installation method solely because the housings look similar.

Can I use one version with any controller?

No. Choose 0–10 V, 0–5 V, 4–20 mA, passive sensing or Modbus RTU to match the controller’s supported input. A passive sensor input is not interchangeable with an active voltage or current input.

Is ±0.3 °C specified across the entire range?

The catalogue specifies ±0.3 °C for active output at 20 °C. It does not state this accuracy for every temperature or for every passive version. Provide your operating temperature and accuracy requirement when requesting a quotation.

What should I consider when choosing a wall location?

Select a position representative of the temperature being monitored. Consider local heat sources, direct sunlight and nearby airflow that could make the reading unrepresentative. Follow the installation instructions supplied with the selected model.

Does IP65 allow continuous submersion?

No. The listed housing and probe protection is IP65; this is not a continuous-submersion specification. Choose the installation to suit the intended environment.

What information should I provide for selection?

Provide the expected minimum and maximum temperatures, the controller’s input type, required accuracy, installation environment and quantity. For passive or digital versions, also confirm the sensing-element requirement or communication requirements.

Request a quotation

MOQ: 5 pcs. Email info@heatcoolsmart.com with your application, required range, output type and quantity.

For duct or immersion installation, see the STE-100 duct / immersion temperature sensor and transmitter.

Request Free Quote

Other Products You May Like

QUALITY · RELIABILITY · INNOVATION
Get In Touch With Us
Follow Us
Top